Search results
1 – 2 of 2Amrita Maddamasetty, Kamesh Bodduru, Siva Bevara, Rukmini Srikant Revuru and Sanjay Kumar
Inconel 718 is difficult to machine due to its high toughness and study hardenability. Though the use of cutting fluids alleviates the problem, it is not sustainable. So, supply…
Abstract
Purpose
Inconel 718 is difficult to machine due to its high toughness and study hardenability. Though the use of cutting fluids alleviates the problem, it is not sustainable. So, supply of a small quantity of specialized coolant to the machining zone or use of a solid lubricant is a possible solution. The purpose of the present work is to improve machinability of Inconel718 using graphene nanoplatelets.
Design/methodology/approach
In the present study, graphene is used in the machining of Inconel 718 alloy. Graphene is applied in the following two forms: as a solid lubricant and as an inclusion in cutting fluid. Graphene-based self-lubricating tool and graphene added nanofluids are prepared and applied to turning of Inconel 718 at varying cutting velocities. Performances are compared by measuring cutting forces, cutting temperature, tool wear and surface roughness.
Findings
Graphene, in both forms, showed superior performance compared to dry machining. In total, 0.3 Wt.% graphene added nanofluids showed the lowest cutting tool temperature and flank wear with 44.95% and 83.37% decrease, respectively, compared to dry machining and lowest surface roughness, 0.424 times compared to dry machining at 87 m/min.
Originality/value
Graphene could improve the machinability of Inconel 718 when used in tools as a solid lubricant and also when used as a dispersant in cutting fluid. Graphene used as a dispersant in cutting fluid is found to be more effective.
Details
Keywords
Amrita M., Rukmini Srikant Revuru, Sreeram Chatti, Sree Satya Bharati Sri Satya Moram, Chandu Byram and Venugopal Rao Soma
Ti6Al4V is a commonly used titanium alloy with several applications in aerospace industry due to its excellent strength to weight ratio. But due to low thermal conductivity, it is…
Abstract
Purpose
Ti6Al4V is a commonly used titanium alloy with several applications in aerospace industry due to its excellent strength to weight ratio. But due to low thermal conductivity, it is categorized as “difficult to machine.” Though machinability can be improved with cutting fluids, it is not preferred due to associated problems. This study aims at eliminating the use of cutting fluid and finding an alternate solution to dry machining of Ti6Al4V. AlTiN coated tools provide good heat and oxidation resistance but have low lubricity. In the present work, graphene, which is known for lubricating properties, is added to the tools using five different methods (tool condition) to form graphene self-lubricated cutting tools.
Design/methodology/approach
Graphene-based self-lubricating tools are prepared by using five methods: dip coating (10 dips and 30 dips); drop casting; and filling of micro/macroholes. Performance of these tools is evaluated in terms of cutting forces, surface roughness and tool wear by machining Ti6Al4V and comparing with conventional coated cutting tool.
Findings
Self-lubricating tool with micro holes filled with graphene outperformed other tools and showed maximum decrease of 33.42% in resultant cutting forces, 35% in surface roughness (Ra) and 30% in flank wear compared to conventional cutting tool.
Originality/value
Analysis of variance for all forces show that tool condition and machining time have significant influence on all components of cutting forces and resultant cutting forces.
Details